- searchresult
- Automatic Sliding Door Operators
- Automatic Swing Door Operators
- Door Closers, Locks and Door Control Hardware
- Glas (Fittings & Systems)
- Movable Walls
- Online Enquiries
- Contact our Experienced Personnel
- Frequently Asked Questions
- FAQ
- Downloads
- Door Hardware
- Automatics
- Glass Fittings and Systems
- Security Systems
- Room Dividing Systems
- Publishing Details/ Disclaimer & Terms of Business
- Publishing Details/ Disclaimer & Terms of Business
|
Automatic Sliding Door Operators 1. Can the DORMA BWN AL and EL range of automatic door operators be interfaced with security.2. Does the DORMA BWN range of automatic sliding doors have a fail safe mechanism?3. What is the size of the EL300/01 housing4. Does the DORMA BWN Automatic sliding door range come with battery back up.5. What is unique about the AL400/01 range of operators?6. Is there an option to have continuous function when mains power has failed.7. What are the door weight recommendation for the DBWN range of automatic sliding door operators?8. What do I have to take into consideration when using large framed or frameless glass type doors?9. Can a break out function be included in an automatic slidng door entrance?10. What type of locking mechanism do the DBWN range of automatic door operators have?11. How do I interface my security and fire alarm requirements into the DBWN range of operators?12. Can I monitor the door status of the AL400/01 and EL300/01 operators?13. How deep do I need to design my lobby to accomodate an airlock entrance?
The AL and EL models of automatic sliding doors can be interfaced with a buildings security system via the addition of options board. Advice should be sought specific to the application required. All DBWN automatic sliding door operators have a provision for interfacing to access control equipment. Advice should be sought on your specific requirements.
Yes, the DORMA BWN range of automatic sliding door operators do have a failsfe system that complies to the Building Codes of Australia Section D2.19. In the case of power failure in the Automatic mode the door will open automatically and then close automatically when power is returned. The door can be closed manually during this time. If the door is in the lock mode, it will remain locked for up to approximately 30 hours under battery back up. Once the battery is depleted the lock will disengage and the door can be opened manually.
The housing dimensions for the standard EL range of operators is 265mm x 152mm, it is also available in a low Profile version 155mm x 230mm
Yes, battery back up is supplied as standard with all DORMA BWN automatic sliding doors.
The AL400/01 operators incorporate a stainless steel tracking system mounted on a high density rubber. This ensures smooth function and quite operation in heavy duty high weight applciations.
Depending on the model of sliding door operator a continuous operating function (UPS) when mains power has failed is available. Advice should be sought when choosing an automaic sliding door operator for the most appropriate option for the application. All DBWN automatic sliding door operators comply with current Building Codes of Australia required function and Australian Standards.
AL400/01 - 400kg total door weight EL300/01 - 300kg total door weight SL201 - Bi Part, 170kg total weight (85kg per door leaf)
It is recommended that all door laves are manufactured according to the appropriate standards and relevant codes. When choosing the appropriate automatic door operator it should be matched to the weight recomendations provided for each model. To achieve a smooth door function a rule of thumb ratio, of 3:1 height vs width should be applied to the door. As the weight, height and width of the door increases it may be necessary for additional track wheels to be included. Advice should be sought from one of our sales consultants on your specific requirements
Yes, we provide a breakout function that can be incorporated into the automatic sliding door that can provide unimpeded egress from the building.
The AL400/01 and EL300/01 range of operators incorporate a motor lock that can secure the door regardless of its position or alignment, making these operators the perfect choice for applications requiring a higher degree of security.
Model: EL300 Ezyfit / AL400 Swipe Card / Exit Button - Provide a voltage free Common and Normally Open contact across the A/Hours Exit input located inside the Power Control Module (PCM). Momentarily closing the contactwill open the doors. Remote Auto / Lock Control (Day/Night) – Place a wire link across Com / Auto input in the PCM or if a four position key switch is connected place it into the Auto Made. Provide a voltage free Common and Normally Open contact across the Common / Lock input inside the PCM. A closed contact will put the door into Lock Mode and an open contact will place the door into Auto Mode. Fire Alarm - Provide a voltage free Common and Normally Open contact across the Fire Alarm input located inside the PCM. A permanent closed contact will open the doors. If the doors are required to close on the fire alarm turn dipswitch number 6 to the off position inside the Logic Control Box. Model: SL201 Swipe Card / Exit Button - Provide a voltage free Common and Normally Open contact across the Sec Open input located on the Lock Board. Momentarily closing the contact will open the doors. Remote Auto / Lock Control (Day/Night) – Place a wire link across the Com / Auto input on the Lock Board; if a four position key switch is connected place it into the Auto Made. Provide a voltage free Common and Normally Open contact across the Sec Lock input on the Lock Board. A closed contact will put the door into Lock Mode and an open contact will place the door into Auto Mode. Fire Alarm - Provide a voltage free Common and Normally Open contact across the Sec Open input located ion the Lock Board. A permanent closed contact will open the doors. If the doors are required to close on the fire alarm signal then place a closed contact across the Sec Lock input on the Lock Board. Model: Horizon HD4 Swipe Card / Exit Button - Provide a voltage free Common and Normally Open contact across the Sec Open input located on the Lock Board. Momentarily closing the contact will open the doors. Remote Auto / Lock Control (Day/Night) – Place the mode pad into Auto Mode. Provide a voltage free Common and Normally Open contact across the Sec Lock input on the Lock Board. A closed contact will put the door into Lock Mode and an open contact will place the door into Auto Mode. Fire Alarm - Provide a voltage free Common and Normally Open contact across the Sec Open input located ion the Lock Board. A permanent closed contact will open the doors. If the doors are required to close on the fire alarm signal then place a closed contact across the Sec Lock input on the LockBoard.
Yes, this can be done by fitting an options board, the options board provides relay outputs for, Door Open, Door Lock, Door Closed and Door Malfunction
At least 3,000 mm is required between door sets to achieve any kind of air lock effect. However as the majority of entrances are designed for two way traffic it is unlikely that even a deep lobby would act as an effective climate control. An interlock device can be incorporated which prevents the two sets of doors being opened at the same time. However we would only recommend installing such a device in trained traffic situations due to the high potential of traffic flow problems. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. Can the DORMA BWN AL and EL range of automatic door operators be interfaced with security.
